Land Rover Discovery 2 Winch Bumper - Terrafirma - TF009 Land Rover Discovery 2 Winch Bumper - Terrafirma - TF009

Terrafirma

The Terrafirma range of bumpers and winch mounts has been designed to meet the broad range of winching and off road activities carried out by Land Rover owners and operators. A combination of performance and practicality has been employed in the development of these bumpers, from recreational and serious off...
The Terrafirma range of bumpers and winch mounts has been designed to meet the broad range of winching and off road activities carried out by Land Rover owners and operators. A combination of performance and practicality has been employed in the development of these bumpers, from recreational and serious off...
£595.95
Web Exclusive Price

Wishlist

To add this product to your wish list you must Sign In or Create an account

The Terrafirma range of bumpers and winch mounts has been designed to meet the broad range of winching and off road activities carried out by Land Rover owners and operators. A combination of performance and practicality has been employed in the development of these bumpers, from recreational and serious off road to commercial and military use.

The entire range has been created around the comprehensive and highly respected Superwinch LP, Talon and Tiger Shark winch ranges from 8500-18000lbs pulling capacity. Of course with most makes of winch sharing common physical dimensions and traditional 10" x 4.5" bolt patterns the majority will fit quite happily into a Terrafirma winch bumper or mount.

All Terrafirma bumpers are made from steel which are then sand blasted, zinc phosphate washed and powder coated semi-gloss black for a factory quality finish. Bumpers include jacking and recovery points where appropriate and are built tough and able to take on the rigours of serious off road and commercial use. Space is built into the chassis mounting brackets on all Defender bumper to allow for steering guard brackets to fit between and spacers are included in the fitting kits to take up the clearance if no guard is to be fitted.

Terrafirma has adopted a common philosophy for the creation of these bumpers. The whole range has been designed to replicate the original bumper profiles as closely as possible while allowing for winch fitment and increased protection. Angles, radiuses, corners and contours are carefully engineered to compliment the original shape and lines of the vehicle so as not to stand out or appear miss-matched. Sufficient chassis fixing points have been incorporated to ensure the stresses of winching and recovery or off road impacts do not move the bumper on its mountings for guaranteed long lasting strength and reliability. 

All Terrafirma bumpers are designed so that no exterior bodywork needs to be cut or trimmed. However some trimming of non-critical 'behind the bumper' material may be required to make space for the winch installation. Front bumpers incorporate jacking points and optional swivel recovery eyes.

Rear bumpers are made to allow the fitment of standard towing equipment, receiver hitches, fuel tank guards and detachable hitch kits and incorporate jacking points and optional swivel eye recovery points.

As Terrafirma front and rear bumpers are designed primarily for off road use priority has been given to winch location, jacking and recovery points over bumper mounted lights, headlamp washer jets and parking sensors. It is however possible in many cases for competent technicians to reinstall these items if specifically required.

The Terrafirma range of bumpers and winch mounts has been designed to meet the broad range of winching and off road activities carried out by Land Rover owners and operators. A combination of performance and practicality has been employed in the development of these bumpers, from recreational and serious off road to commercial and military use.

The entire range has been created around the comprehensive and highly respected Superwinch LP, Talon and Tiger Shark winch ranges from 8500-18000lbs pulling capacity. Of course with most makes of winch sharing common physical dimensions and traditional 10" x 4.5" bolt patterns the majority will fit quite happily into a Terrafirma winch bumper or mount.

All Terrafirma bumpers are made from steel which are then sand blasted, zinc phosphate washed and powder coated semi-gloss black for a factory quality finish. Bumpers include jacking and recovery points where appropriate and are built tough and able to take on the rigours of serious off road and commercial use. Space is built into the chassis mounting brackets on all Defender bumper to allow for steering guard brackets to fit between and spacers are included in the fitting kits to take up the clearance if no guard is to be fitted.

Terrafirma has adopted a common philosophy for the creation of these bumpers. The whole range has been designed to replicate the original bumper profiles as closely as possible while allowing for winch fitment and increased protection. Angles, radiuses, corners and contours are carefully engineered to compliment the original shape and lines of the vehicle so as not to stand out or appear miss-matched. Sufficient chassis fixing points have been incorporated to ensure the stresses of winching and recovery or off road impacts do not move the bumper on its mountings for guaranteed long lasting strength and reliability. 

All Terrafirma bumpers are designed so that no exterior bodywork needs to be cut or trimmed. However some trimming of non-critical 'behind the bumper' material may be required to make space for the winch installation. Front bumpers incorporate jacking points and optional swivel recovery eyes.

Rear bumpers are made to allow the fitment of standard towing equipment, receiver hitches, fuel tank guards and detachable hitch kits and incorporate jacking points and optional swivel eye recovery points.

As Terrafirma front and rear bumpers are designed primarily for off road use priority has been given to winch location, jacking and recovery points over bumper mounted lights, headlamp washer jets and parking sensors. It is however possible in many cases for competent technicians to reinstall these items if specifically required.

Shipping

We aim to despatch all items out within 3 working days after payment has cleared. This is just a guideline as we can often despatch your item quicker, within 1-2 working days.

Carriage costs are for UK mainland ONLY. Please contact us for delivery costs if outside UK Mainland.

Highlands and Islands are not included within the UK Mainland. * (Post codes IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE PO30, PO34-40, IM, BT & Channel Islands).

We use a range of courier services so as you, as the customer, can get the best delivery prices available. The majority of our items will be sent Royal Mail (3-5 day delivery). If your item is slightly larger it will more than likely be sent with the courier, My Hermes (3-5 day delivery). If your item is a large or heavy item such as a bumper, winch etc we will use TNT courier service (Next working day).

We can send items that we have in stock out for next day delivery if you request however this will be paid for by the customer.

If for any reason we are unable to supply your item to you within the time scale provided above we will contact you letting you know an approximate lead time.

Shipping

We aim to despatch all items out within 3 working days after payment has cleared. This is just a guideline as we can often despatch your item quicker, within 1-2 working days.

Carriage costs are for UK mainland ONLY. Please contact us for delivery costs if outside UK Mainland.

Highlands and Islands are not included within the UK Mainland. * (Post codes IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE PO30, PO34-40, IM, BT & Channel Islands).

We use a range of courier services so as you, as the customer, can get the best delivery prices available. The majority of our items will be sent Royal Mail (3-5 day delivery). If your item is slightly larger it will more than likely be sent with the courier, My Hermes (3-5 day delivery). If your item is a large or heavy item such as a bumper, winch etc we will use TNT courier service (Next working day).

We can send items that we have in stock out for next day delivery if you request however this will be paid for by the customer.

If for any reason we are unable to supply your item to you within the time scale provided above we will contact you letting you know an approximate lead time.

Recently Viewed Products Kürzlich angesehene Produkte