All Products

These off-road tough articulating brackets mount MAXTRAX, TRED Pro and other popular rescue devices with similar hole spacing off the side of the Front Runner Slimline II rack. These off-road tough brackets securely mount MAXTRAX, TRED Pro and other similar hole spacing recovery devices...

Improve the aerodynamics of your Front Runner Slimline II roof rack and reduce wind noise when travelling at high speeds.Consists of:1 x Wind Fairing1 x Rubber BladeInstallation HardwareFitting InstructionsMaterials used:Black powder coated aluminumEPDM RubberProduct Dimensions:157mm (6.2'') L x 1174mm (46.2'') W x 174mm (6.9'')...

Out for an adventure? Easily mount your GoPro action camera to your Front Runner Slimline II Roof Rack or Load Bars using this sturdy bracket. This Front Runner bracket allows you to mount your GoPro action camera effortlessly and quickly to your Slimline II...

Get your board up and off the top of the Front Runner Slimline II Rack and free up valuable storage space for a Roof Top Tent or other gear. Designed to keep your boards safe and secure during transport on the worlds toughest roads....

A convenient and compact 4 piece tool kit for those quick adjustments to Front Runner Racks and Accessories.Consists of:1 x 5mm Ball End Hex Key1 x 4mm Ball End Hex Key1 x 10mm Ratchet Wrench1 x 13mm Ratchet WrenchMaterials used:Chrome VanadiumTool SteelProduct Dimensions:150mm (5.9'')L...

These plugs seal the mounting points in your roof if you remove the Slimline II Roof Rack and mounting system from your vehicle by creating a water tight seal to keep your roof leak-free in the harshest conditions.Consists of:12 x Sealing capsInstallation HardwareFitting InstructionsMaterials...

Elevate your camp kitchen by cooking and baking in the fire with a Potjie Pot / Dutch oven. This #3 size Potjie Pot and off-road tough bracket combo bolts quickly and easily onto any Front Runner Rack Tray.Consists of:Rack mounted bracketStrap guide Ratchet strapmounting...

How often have you set up your campsite, unrolled the awning, and discovered that the shade you had mid morning, is gone mid afternoon? Thats why Front Runner created the movable awning arm. It swings out, holding the awning, giving more precise control over...

​A replacement set of foam inserts for your Front Runner Canoe/Kayak Carrier or Front Runner Pro Surf Board Carrier when your current set has been damaged, lost or worn out.Consists of:4 Replacement Foam pads Materials used:Cross Linked Closed Cell Polyethylene foam Product Dimensions:230mm (9.1)...

Easily mount the Eezi Awn 1000/2000 Series awning to your Front Runner Slimline II Roof Rack, no drilling required.Consists of:2 x Front Runner Awning Brackets Mounting hardwareMaterials used:Black powder-coated steelProduct Dimensions:80mm (3.2'') W x 70mm (2.8'') D x 120mm (4.7'') H  Weight:1.4kg (3.1lbs)These brackets, sold...

A bracket that securely carries a no.2/3 potjie pot by bolting onto your Slimline/Slimline II roof rack.Consists of: Potjie bracket for No 2 No 3 pot Ratchet strapMounting hardwareMaterials used:Black powder-coated steelProduct Dimensions:276mm (10.9'') L x 229mm (9'') W x 133mm (5.2'') H  Weight:2kg (4.4lbs)Create deliciously...

For use with most Surfboards, SUP boards, Wind Surf and Kite Boards. Specially designed to keep your boards safe and secure during transport on the world’s toughest roads. Features variable width adjustment, padded board protection and universal water sport board compatibility. Made of stainless...

So you're adding slats onto your roof rack? Use these additional tray slat bolts to fasten them to your Slimline II roof rack. Sold in pairs.Consists of: 2x M8x25 Button HeadsSo you're adding slats onto your rack? Use these additional tray slat bolts to...

Replacements for lost or damaged Slimline II assembly components.Consists of: 32x M8 nyloc nuts4x M6x16 dome head bolts28x M8x25 dome head bolts4x M8x45 dome head bolts2x Aluminium rack joiners (thin)2x Aluminium rack joiners (thick)Replacement nuts and bolts for lost or damaged Slimline II components.Please...

If you wish to add additional slats to a Slimline II Roof Rack that is 8 slats or more long, (ie. to create a solid platform for sitting, photography, etc.), these brackets are needed for those additional slats that are to be positioned next...

Universal brackets that fit onto the Front Runner Slimline II Roof Rack's side profile, allowing you to mount accessories to your roof rack without having to drill into it.Consists of: Comes in a set of (3) three brackets with pre-cut mounting holes. Washers, bolts and nuts included.   Materials...

Mount the base plate to the slats on the sides of a Front Runner Roof Rack Tray, then quickly snap in and retract the folded arm for the perfect solution for hanging your solar shower or showerhead.Materials used:2.5mm (0.098) black powder coated stainless steelLightweight...

These easy to use tie down rings quickly and easily mount to the t-slots on the top, sides and/orthe bottom ofFront Runner Slimline IIRoof Racks.Sold in Pairs.Material used: Stainless steel Consists of: 2x Ring nuts 2x Bolts 2x Plastic washers Weight: 0.12kg (0.26lbs)These easy...

These adaptor plates give you the ability to attach a Thule slotted Load Bar or Aero Bar and Thule Accessories to a Front Runner Roof Rack.Works with: Both the SLOTTED SQUARE and AERO Thule Load Bars.   Materials used: 2.5mm (0.098'') high strength steel,...

This rubber beading fits into your Front Runner Roof Rack t-slots to create a perfect rattle free and non-slip surface.  Sold in 1.5m/5' lengths.Consists of:1.5m (5') Length of beadingMaterials used: Ethylene propylene diene monomer (M-class) all weather rubberWeight:0.1kg (0.3lbs)Need a little extra insulation between...

Deflect branches away from your wind screen with this simple yet ingenious cable system.Consists of: 2x 110mm (4.3)M6 Turn Buckles 2x 2m (6.6') Stainless Steel Cables with Fortified and Clamped Loops 2x Front Runner Galvanised Tie-Down Rings Weight: 1kg (2.2lbs)A simple and effective cable...

Inflate your Dometic tent or awning (or other inflatable camping gear pieces such as mattresses) effortlessly with the Dometic Downdraught Manual Pump. The hand pump features a 2.2L/0.58 gal capacity, an integrated pressure gauge, and ergonomic handles.Consists of:1 x 2.2L pump1 x Hose5 x...

This electric pump is the ideal solution for inflating your Dometic AIR awnings and tents. The 12V pump comes with a range of features, including an extra-long cable, a backlit digital display, and automatic shutdown. It also includes six assembly nozzles for added convenience.Consists...

The ultimate solution for hassle-free transport, storage, and protection of your Gale electric pump. This durable polyester bag features a zippered mesh section and a convenient carrying handle, allowing you to easily pack and go with your pump wherever you need it. Plus, its...

Lose a tooth? We've got you covered with this set of 22 anodised alloy teeth, ready for duty on any MAXTRAX X Series 4WD Recovery Tracks, so you can keep adventuring safely and with a smile.Consists of:22 x Anodised alloy replacement teeth1 x Soft...

This set of 4 quick-release mounting pins keeps up to two pairs of MAXTRAX XTREME recovery devices securely on your vehicle and ready for action anytime.Consists of:4 x XTREME Mounting PinsInstallation Hardware Materials used:Black NylonStainless Steel Product Dimensions:165mm (6.5'') L x 40mm (1.6'') of...

This set combines two tough-as-nails recovery devices that work separately or together to ensure you'll find your way out of any sticky situation.Consist of:1 x MAXTRAX Mini / Jaxbase combo1 x Pair of Telltale LeashesInstructional/warranty card Material used:UV-stabilized, flexible, super tough engineering-grade reinforced nylon...

With this pair of sleek, sturdy MAXTRAX XTREMEs, you'll look cool on the road and be able to stay cool off it knowing you're rolling with the world's toughest recovery device.Consists of:1 x Pair of MAXTRAX XTREME Recovery Devices2 x Leashes Materials used:UV-stabilized, flexible, super...

These advanced 4WD, lightweight and tough MAXTRAX MKII recovery devices use integrated teeth that grip into a tyre's/tire's tread to provide traction in sand, mud or snow.Consists of:2 x MAXTRAX2 x Orange telltale leashes Materials used:UV-stabilized, flexible, super tough engineering-grade reinforced nylonHard-anodized alloy Product...

These advanced 4WD, lightweight and tough MAXTRAX MKII recovery devices use integrated teeth that grip into a tyre's/tire's tread to provide traction in sand, mud or snow.Consists of:2 x MAXTRAX 2 x Orange telltale leashes Materials used:UV-stabilized, flexible, super tough engineering-grade reinforced nylonHard-anodized alloy...