Front Runner

A replacement quick release lever for the Front Runner Fork Mount Bike Carrier - by Front RunnerConsists of:1 x Quick Release SkewerMaterials used:Plated and powder coated carbon steelRubber CoverProduct Dimensions:165mm (6.5) L x 76mm (3) W x 35mm (1.4) HWeight:60g (2.1oz)Quick Release Lever securely...

These off-road tough articulating brackets mount MAXTRAX, TRED Pro and other popular rescue devices with similar hole spacing off the side of the Front Runner Slimline II rack. These off-road tough brackets securely mount MAXTRAX, TRED Pro and other similar hole spacing recovery devices...

Improve the aerodynamics of your Front Runner Slimline II roof rack and reduce wind noise when travelling at high speeds.Consists of:1 x Wind Fairing1 x Rubber BladeInstallation HardwareFitting InstructionsMaterials used:Black powder coated aluminumEPDM RubberProduct Dimensions:157mm (6.2'') L x 1174mm (46.2'') W x 174mm (6.9'')...

Out for an adventure? Easily mount your GoPro action camera to your Front Runner Slimline II Roof Rack or Load Bars using this sturdy bracket. This Front Runner bracket allows you to mount your GoPro action camera effortlessly and quickly to your Slimline II...

Get your board up and off the top of the Front Runner Slimline II Rack and free up valuable storage space for a Roof Top Tent or other gear. Designed to keep your boards safe and secure during transport on the worlds toughest roads....

A convenient and compact 4 piece tool kit for those quick adjustments to Front Runner Racks and Accessories.Consists of:1 x 5mm Ball End Hex Key1 x 4mm Ball End Hex Key1 x 10mm Ratchet Wrench1 x 13mm Ratchet WrenchMaterials used:Chrome VanadiumTool SteelProduct Dimensions:150mm (5.9'')L...

These plugs seal the mounting points in your roof if you remove the Slimline II Roof Rack and mounting system from your vehicle by creating a water tight seal to keep your roof leak-free in the harshest conditions.Consists of:12 x Sealing capsInstallation HardwareFitting InstructionsMaterials...

Elevate your camp kitchen by cooking and baking in the fire with a Potjie Pot / Dutch oven. This #3 size Potjie Pot and off-road tough bracket combo bolts quickly and easily onto any Front Runner Rack Tray.Consists of:Rack mounted bracketStrap guide Ratchet strapmounting...

How often have you set up your campsite, unrolled the awning, and discovered that the shade you had mid morning, is gone mid afternoon? Thats why Front Runner created the movable awning arm. It swings out, holding the awning, giving more precise control over...

​A replacement set of foam inserts for your Front Runner Canoe/Kayak Carrier or Front Runner Pro Surf Board Carrier when your current set has been damaged, lost or worn out.Consists of:4 Replacement Foam pads Materials used:Cross Linked Closed Cell Polyethylene foam Product Dimensions:230mm (9.1)...

Easily mount the Eezi Awn 1000/2000 Series awning to your Front Runner Slimline II Roof Rack, no drilling required.Consists of:2 x Front Runner Awning Brackets Mounting hardwareMaterials used:Black powder-coated steelProduct Dimensions:80mm (3.2'') W x 70mm (2.8'') D x 120mm (4.7'') H  Weight:1.4kg (3.1lbs)These brackets, sold...

A bracket that securely carries a no.2/3 potjie pot by bolting onto your Slimline/Slimline II roof rack.Consists of: Potjie bracket for No 2 No 3 pot Ratchet strapMounting hardwareMaterials used:Black powder-coated steelProduct Dimensions:276mm (10.9'') L x 229mm (9'') W x 133mm (5.2'') H  Weight:2kg (4.4lbs)Create deliciously...

For use with most Surfboards, SUP boards, Wind Surf and Kite Boards. Specially designed to keep your boards safe and secure during transport on the world’s toughest roads. Features variable width adjustment, padded board protection and universal water sport board compatibility. Made of stainless...

So you're adding slats onto your roof rack? Use these additional tray slat bolts to fasten them to your Slimline II roof rack. Sold in pairs.Consists of: 2x M8x25 Button HeadsSo you're adding slats onto your rack? Use these additional tray slat bolts to...

If you wish to add additional slats to a Slimline II Roof Rack that is 8 slats or more long, (ie. to create a solid platform for sitting, photography, etc.), these brackets are needed for those additional slats that are to be positioned next...

Universal brackets that fit onto the Front Runner Slimline II Roof Rack's side profile, allowing you to mount accessories to your roof rack without having to drill into it.Consists of: Comes in a set of (3) three brackets with pre-cut mounting holes. Washers, bolts and nuts included.   Materials...

Mount the base plate to the slats on the sides of a Front Runner Roof Rack Tray, then quickly snap in and retract the folded arm for the perfect solution for hanging your solar shower or showerhead.Materials used:2.5mm (0.098) black powder coated stainless steelLightweight...

These easy to use tie down rings quickly and easily mount to the t-slots on the top, sides and/orthe bottom ofFront Runner Slimline IIRoof Racks.Sold in Pairs.Material used: Stainless steel Consists of: 2x Ring nuts 2x Bolts 2x Plastic washers Weight: 0.12kg (0.26lbs)These easy...

These adaptor plates give you the ability to attach a Thule slotted Load Bar or Aero Bar and Thule Accessories to a Front Runner Roof Rack.Works with: Both the SLOTTED SQUARE and AERO Thule Load Bars.   Materials used: 2.5mm (0.098'') high strength steel,...

This rubber beading fits into your Front Runner Roof Rack t-slots to create a perfect rattle free and non-slip surface.  Sold in 1.5m/5' lengths.Consists of:1.5m (5') Length of beadingMaterials used: Ethylene propylene diene monomer (M-class) all weather rubberWeight:0.1kg (0.3lbs)Need a little extra insulation between...

Deflect branches away from your wind screen with this simple yet ingenious cable system.Consists of: 2x 110mm (4.3)M6 Turn Buckles 2x 2m (6.6') Stainless Steel Cables with Fortified and Clamped Loops 2x Front Runner Galvanised Tie-Down Rings Weight: 1kg (2.2lbs)A simple and effective cable...

A spare wheel carrier that mounts onto your Land Rover Defender 130 and keeps that spare wheel safe and secure.​ A spare wheel carrier for the Land Rover Defender 130/DC Pickup. Allows fitment of an additional spare wheel to the rear of the vehicle. Secures...

A spare wheel carrier that mounts onto your Land Rover Defender 90 110 Station Wagon and keeps that spare wheel safe and secure.Please contact us for the latest lead time if this item is showing as "Currently Unavailable" or "Stock Due"

Turn the load bed of your Honda Ridgeline into a safe and convenient place to secure cargo by installing Front Runner’s Cargo Rail Kit. These three strong Rails and six Black Tie Down Rings are used to secure cargo in the load bed using...

A Front Runner Cargo Rail that can be fitted to a variety of flat surfaces to create latching and securing points. This Cargo Rail is supplied with (2) two movable eye nuts which are secured onto the rail by turning.Consists of:1 x 1150mm Cargo...

A Front Runner Cargo Rail that can be fitted to a variety of flat surfaces to create an attachment and securing point. This Cargo Rail is supplied with (1) one movable eye nut which is secured onto the rail by turning and locking up...

​Keep your vehicle's tail-lights protected from damage with these tough, plastic coated, tail-light protectors.​Keep your vehicle's tail-lights protected from damage with these tough, plastic coated, tail-light protectors. Made out of high strength steel. Polyethylene plastic coated for protection against the elements. Designed specifically for your Land...

Keep your vehicle's headlights protected from damage with these tough, plastic coated, headlight protectors. Made out of high strength steel. Polyethylene plastic coated for protection against the elements. Mounts to existing mounting points on your Land Rover Defender and uses the original nuts and bolts. Designed...

​Keep your vehicle's tail-lights protected from damage with these tough, plastic coated, tail-light protectors.Consists of:2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steel Made out of steel. Polyethylene plastic coated for protection against the elements. Designed specifically for...

Install the 4.5W LED Rock Light on your Slimline II or Slimsport Rack Handle Bracket for extra nighttime visibility.Consists of:1 x LED Rock Light 4.5W Materials used:Black plastic Product Dimensions:99mm (3.9'') L x 51mm (2'') W x 54mm (2.1'') H Weight:85g (3oz)4.5W LED rock...