This Land Rover Defender 90 came to us as a Hard Top which our customer wished to convert into a soft top. Body panels removed, roll cage fitted and hood attached the transformation was complete.
For the full list of jobs done and images of the vehicle throughout the process please see below.
Here's a before and after:
|Removal of Rear Body Sides and Roof|
|Safety Devices Rear Heavy Duty Hood Stick Set|
|Exmoor Trim Heavy Duty Drain Channel Set|
|Safety Devices Roll Cage|
|90" Full Hood Stayfast with Side Windows|
|Tailgate Aassembly - Drop Down|
|Paint New Tailgate Assembly|
|Half Bulkhead Removal Bar|
|185 Piece Full Stainless Steel Bolt Kit|
|BAS Remap for 2.2 TDCI|
|BAS Up-Graded Intercooler|
|Rubber Mat in Rear Load Area - Chequerplate Design|
|Stainless Steel Door Thresh|
|265 75 16 BFG Tyres on Steel Modular Rims|
|Fitting and Balancing|
|Mud UK Seat Rails|
|Griffin Performance Stainless Exhaust|
|Paint Door, Bonnet, Tailgate Hinges Black|
|Black Windscreen Billets|
Stainless Steel Anti-Loose Latches
|Rubber Mat on Tailgate|
|Paint Sun Visors|
|Chequerplate Side Sills Black|
|Glove Box Converter|
|Renew Air Filter|
|Equipe 4x4 Side Air Vent|
|Renew Puma Bonnet Cable - 2 Part|
|Swing Away Wheel Carrier|
*Images are in no particular order.
If you would like any of the items seen in this preparation or would like a similar job doing on your vehicle don't hesitate to contact us on +44(0)1751 430 693 or email firstname.lastname@example.org.